Boiler Tube Accessories
With numerous Boiler Tube Accessories, most are listed here in the PFD below. When purchasing boiler tube rolling drives, the correct mandrel is needed to make the connection, from the drive to the expander. When re-tubing, a thorough site survey is advised to see what tooling is required. Once the boiler is open carry out a complete survey.
If you still bead the old way with Air Chipping Gun and Beading chisel, then contact us for the correct beading chisels which we will gladly supply. These are manufactured in-house to the size you require. On the other hand, if you are a start-up company we can quote you for a complete re-tubing tool set up covering tubes from 2.0″ up to 3.0″ OD, flared and straight tubes.
Boiler tube Accessories
Mandrel Drives
Mandrel drives are used to connect to rolling drives. There are several different types of mandrel drive. Ranging from interchangeable female square, to fixed female squares on morse taper connections. To drive with three jaw chucks we have the triangular shank - female square.
All Accessories can be found in the PDF Below.
Right Angled Worm Drives
The Right Angled Worm Drive is used for operating in very confined areas of boiler headers. Made in a one piece construction for maximum durability.
All Boiler Accessories can be found in the PDF Below.
Universal Joints
Three different Universal Joints are available in different configurations. From 3/8" to 1.0" square sizes and either female/female or male/female. Also a double Universal Joint Female/Female.
All Boiler Tube Accessories can be found in the PDF Below.
Parallel Gear Train Drive
Parallel Gear Train Drives can reverse the drive by 180 degrees. They have high strength alloy gears with bronze bushings to increase longevity.
All Boiler Accessories can be found in the PDF Below.
Female Couplings and Extensions
Numerous couplings and extensions can be found in the pdf.
All Boiler Tube Accessories can be found in the PDF Below.
Ways to use - Boiler Tube Accessories
Associated Companies
