Tube Installation and Removal Tools
Tube Installation and Removal Tools
Tube Installation and Tube Removal Tools form the backbone of any tool crib of retubing companies. Within this page and all others, you will find every tool needed to remove and re-install tubes in pressure tubular vessels. From our manufacturers in Germany, India, Canada and the USA we select the best-performing tools we can find. We take these tools and use them ourselves before we offer them on our websites.
We are in direct contact with our manufacturers and their engineers. We develop tools that work in harmony with the operator and safety is always our main priority.
All titles and pictures are Live which takes you to the relevant PDF.
Tube Installation Tools
ST Serrating and Grooving Tool
The ST Series is a high-production tool which is ideal for CNC applications.
NW Serrating and Grooving Toll
Available from 3/8" to 4.0" Bore size. One tool covers a range of sizes.
Tube Sheet Reamer
From 3/8" to 3.0" to TEMA Spec sizes in Morse Taper or Chucking.
Tube End facer
Tube End Facers from 3/8" to 2.1/2" OD. Each tool is supplied with a set of pilot bearings to cover other tube gauges.
Weld Removal
Weld removal tool for tubes from 1.1/2" to 4.0"OD. Three cutting blades remove welds from tube ends for tube removal.
Tube Sheet Hole Brush
Tube sheet hole brushes ideal for cleaning tube holes in boilers before tube replacement.
Tube Guides
Tube guides help guide the tube through any baffles within the vessel. Cord can be tied to the head to aid the direction.
Vacuum Leak Detector
The vacuum leak detector finds leaking tubes by creating a vacuum in the tube.
Tube to Tube Sheet
Tube to tube sheet joint testing equipment available for testing tubes up to 1.1/4" OD.
Tube Removal Tools
Thick Wall Cutter
The PR68 Internal Tube Cutter is the cutter for thick walled tube. Available in models from 3/8" to 4.13" ID.
Push Type Cutter
The ATP Series cutter is a fast push type cutter supplied with pilot bushings from 12 to 22 BWG.
One Revolution Cutter
The OTC Series Cuts and pierce thin wall tube. Especially used when tubes are to be plugged and welded.
Fully Auto Puller
Fully automatic hydraulic system pulls tubes up to 3.0" and stubs up to 4.0". 3 phase system with a 9hp electric motor.
Semi Auto Puller
The semi auto tube pulling system produced in North America pulls tubes up to 3.0". Three different tube pulling guns available.
Manual Tube Puller
The manual tube puller, available for small tube sizes up to 1.0"OD. The ideal tool for pulling a small amount of tubes.
Removal Tools
Within the PDF you will find tube wall reducers, tube wall collapsing tools and tube knockout tools.
Pine Jenny Systems
The Powermaster Industrial pine jenny system is produced here in North America. This uses a centerless cylinder to pull tubes.
Tube Plugs
Tube plugs manufactured by Powermaster Industrial in house to customer required sizes and material. Mill sheets supplied with all plugs.
Product Quality
We work to high tolerances for all machining of expanders including associated equipment. This allows accurate expansion, achieving perfectly sealed joints in tube sheets and in addition, using the best tools steel and cryogenic processes for hardening and conditioning and giving our tooling the optimum performance in the harshest surroundings. We assemble each expander while checking the quality of the manufacture. Every individual tool is laser-marked with our name, Powermaster Canada. Also, we mark with the tube OD, wall thickness and expansion range. We oil, bag and box expanders for shipping. Therefore, with our quality control and machining excellence, we supply a tool that stands the test of endurance and reliability.
