Tel: (613) 764-0572

quotes@powermasterindustrial.com

Tube Tools Rentals

Tube Tool Rentals

On this page, you will find all our tube tools rentals available. We continue to add to our rental fleet but if you don’t see what you need then Contact us. We are here to help – (613 764-0572).

Tube Rolling Rentals - Electric 120v

TCW Torque Controller and Drive

The TCW Torque Controller comes with either the MPG-2L for steel tubes up to 1.3/4″OD or the MPG-3L for steel tubes up to 3.0″OD. In fact, The TCW is the only Wattage-based unit available, significantly increasing the quality of the finished joint.

Rental Period and Cost

Rental is for Seven (7) days on-site. Transportation time to the customer and back is covered by the renter. The cost of transport to the customer and back is covered by the renter.

Cost: $525.00 Excl Shipping, per 7 days on-site.

Tube Installation Tooling

EHB 32 2.2 R/RL Electric 120v

The EHB 32 is an independent rolling drive with a built-in torque controller. This rolling drive will roll tubes up to 2.0″OD. Easy controls for giving a rolling variable load speed from 60-140 rpm. The unit is reversible for backing out expanders and delivering up to 92 ft/lb of torque.

Rental Period and Cost

Rental is for Seven (7) days on-site. Transportation time to the customer and back is covered by the renter. The cost of transport to the customer and back is covered by the renter.

Cost: $455.00 Excl Shipping, per 7 days on-site.

Boiler tube rolling drives

ETE 32 2.3 R/RL Electric 120v

This unit has no problem rolling tubes up to 3.0″OD with an output of 174 ft/lbs of force. Easy controls for giving a rolling variable load speed from 60-140 rpm. and the unit is reversible for backing out tube expanders.

Rental Period and Cost

Rental is for Seven (7) days on-site. Transportation time to the customer and back is covered by the renter. The cost of transport to the customer and back is covered by the renter.

Cost: $495.00 Excl Shipping, per 7 days on-site.

Boiler tube rolling drives

Tube Tools Rentals - Pneumatic Rolling Motors

P72 RT 190 Right Angled Rolling Drive

Producing a maximum torque of 190 Nm-140 ft/lbs The P72RT190 can roll tubes up to 2.1/2″OD. Right angled specifically designed for rolling tubes in mud and steam drums. 

Rental Period and Cost

Rental is for Seven (7) days on-site. Transportation time to the customer and back is covered by the renter. The cost of transport to the customer and back is covered by the renter.

Cost: $525.00 Excl Shipping, per 7 days on-site.

right angled boiler tube rolling drives

P72 RT 90 Right Angled Rolling Drive

right angled boiler tube rolling drives